1.5-liter engine Ford M8DA or Focus 3 1.5 EcoBoost was produced from 2014 to 2019 as a replacement for the previous 1.6-liter engine in models such as the Focus and C-MAX. A similar powertrain under the hood of the Ford Mondeo has its own UNCA index. The 1.5 EcoBoost line also includes engines: - M8MA, - M9DA, and - M9MA.
| Exact capacity | 1498 cm³ |
| Power system | direct injection |
| Engine power | 150 HP |
| Torque | 240 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 79 mm |
| Piston stroke. | 76.4 mm |
| Compression ratio | 10 |
| Engine features | intercooler |
| Hydraulic compensator. | there is no |
| Timing drive | belt |
| Timing phase adjuster | Ti-VCT |
| Turbocharging | tak |
| What oils to use | 4.1 liters 5W-20 |
| Fuel type | 95 |
| Environmental class | EURO 5/6 |
| Approximate life expectancy | 240 000 HP |
| City | 9.9 litry |
| Route | 4.9 litry |
| Mixed | 6.7 litry |
The weight of the M8DA engine according to the catalog is 120 kg. The M8DA engine number is located at the junction of the block and the gearbox. Power units of this series are prone to overheating, so please keep the radiators clean. Due to a failure of the cooling system electromagnetic clutch, it causes a gasket leak and affects the cylinder head. The engine is also affected by the problem of piston destruction due to detonation. The intake valves quickly accumulate carbon deposits and oil leaks frequently occur. Valve clearance adjustment is required every 100,000 km.
| Focus 3 (C346) | 2014 - 2019 |
| C-Max 2 (C344) | 2015 - 2019 |
The 1.8-liter Ford CHBA or CHBB engine, also known as the 1.8L Duratec HE, was produced from 2000 to 2007 and installed in the third generation of the popular Mondeo model in all its body versions on our market. This engine was developed by Mazda and is a variant of the engine marked with the L8-DE index. Duratec HE Engine: QQDB CFBA AODA AOWA CJBA XQDA SEBA SEWA YTMA
The 1.5-liter turbocharged engine Ford M9MA or Kuga 1.5 EcoBoost was produced from 2014 to 2019 and installed in the Kuga model instead of the 1.6-liter engine. It only appeared in our country after the facelift. This engine was developed after the introduction of tax incentives for engines with a capacity below 1500 cc in some countries. The 1.5 EcoBoost engine line also includes units: M8DA, M8MA, and M9DA.
The 1.6-liter engine Ford L1E or Escort 1.6 Zetec 16v was produced from 1992 to 1995 and installed in the fifth generation of the popular Escort model in all its body variants. A nearly identical power unit was also used in the Mondeo 1 model, but designated as L1F. Zetec series: L1N, EYDC, RKB, NGA, EYDB, EDDB, and EDDC.
The 2.0-liter Ford NGA or Mondeo 2.0 Zetec engine was produced from 1993 to 1998 and installed in the first two generations of the Mondeo model in all its numerous body versions. It was the only engine available in the range, which was offered in both Zetec and Zetec-E versions. Zetec series: L1E, L1N, EYDC, RKB, EYDB, EDDB, and EDDC.
The 2.0-liter Fiat 250A1000 or 2.0 JTD diesel engine has been produced in Italy since 2010 and is installed in the third generation of the Ducato minibus under the index 115 Multijet. It is important to distinguish this engine from the 2.0 HDi clones that were installed in the second generation Ducato. The Multijet II series includes: 198A2000, 198A3000, 198A5000, 199B1000, and 263A1000.
2.8-liter diesel engine Toyota 3L, a Japanese company that has been producing it from 1988 to 2015 and installing it in Hiace minibuses, Dyna trucks, and Hilux pickup trucks-SUVs. Copies of this engine are still being produced for various types of commercial vehicles. The L engine series includes: 2L, 2L-T, 2L-TE, 2L-THE, 5L, and 5L-E.