1.6-liter Ford SHDA, SHDB or Duratec 1.6 engine was assembled from 2007-2011 and used in the second generation of Focus, as well as in C-Max and Volvo marked as B4164S3. This engine is essentially a modification of the HWDA unit, but with an open cooling cover. Duratec series: FUJA, FXJA, ASDA, FYJA, and HWDA.
| Exact capacity | 1596 cm³ |
| Power system | injector |
| Engine power | 100 HP |
| Torque | 150 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 79 mm |
| Piston stroke. | 81.4 mm |
| Compression ratio | 11 |
| Engine features | DOHC |
| Hydraulic compensator. | there is no |
| Timing drive | strip |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 4.1 liters 5W-30 |
| Fuel type | 95 |
| Environmental class | EURO 4 |
| Approximate life expectancy | 330 000 HP |
| City | 10.6 litry |
| Route | 6.0 litry |
| Mixed | 7.7 litry |
The weight of the SHDA engine according to the catalog is 105 kg. The Ford SHDA engine number is located at the front, at the junction with the gearbox. Duratec series engines are reliable, but they prefer good fuel and it is better to use AI-95. Poor fuel can damage spark plugs, sometimes they last less than 10,000 km. For the same reason, the expensive fuel pump can quickly fail. In the European version of Duratec engines, when the timing belt breaks, the valves are always bent. Hydraulic compensators are not provided, so the valves need to be adjusted periodically.
| C-Max 1 (C214) | 2007 - 2010 |
| Focus 2 (C307) | 2008 - 2011 |
2.0-liter Ford XQDA or 2.0 Duratec SCi TI-VCT engine has been produced since 2010 and installed in the third generation of the Focus model for the North American and Russian markets. Despite the use of direct injection, the engine performs well with our fuel. Duratec HE: QQDB CFBA CHBA AODA AOWA CJBA SEBA SEWA YTMA
The 2.5-liter Ford HYDA or 2.5 Duratec ST225 engine was produced from 2005 to 2010 and installed in the sporty second generation of the Focus model with the ST index. This engine was basically a clone of the power unit from the Volvo Modular engine family. The Duratec ST/RS line includes the following engines: ALDA, HMDA, HUBA, HUWA, HYDB, and JZDA.
The 2.5-liter Ford SGA or 2.5 Duratec V6 ST engine was produced in the USA from 1999 to 2000 and was only installed in the sport version of the second generation Mondeo model, designated as ST200. This powertrain allowed for acceleration of this fairly large car to 100 km/h in 7.7 seconds. The Duratec V6 engine lineup also includes units: - SEA, - LCBD, - REBA, and - MEBA.
The 2.0-liter engine Ford F8CE, also known as Split Port SPI 2000, was produced from 1997 to 2002 and installed in the third generation of the Escort model available in the US and Canadian markets. This engine was initially introduced as F7CE with minor modifications. The Split Port line also includes an engine labeled YS4E.
The 1.4-liter DV4TED4 diesel engine with 16 valves was produced by Peugeot from 2002 to 2005 and installed in the first generation Citroen C3 and the Suzuki Liana with the index 10FD53. There were two versions of this engine equipped with the Delphi Common Rail system: 8HY with a power of 90 hp and 8HV with a power of 92 hp. The DV4 engine line also includes: - DV4TD, - DV4TED, - DV4C.