Ford Engine Hydb

The 2.5-liter Ford HYDB or Duratec ST 2.5t 20v engine was produced from 2008 to 2013 and was only used in the first generation of the popular crossover car, Kuga, in our market. This engine was a slightly modified version of the Volvo Modular engine series. The Duratec ST/RS engine range includes: ALDA, HMDA, HUBA, HUWA, HYDA, and JZDA.

Technical specifications of Ford HYDB 2.5 Duratec ST i5 engine with 200 hp.

Exact capacity2522 cm³
Power systemdistributed injection
Engine power200 HP
Torque320 nm
Engine blockaluminum R5
Block headaluminum 20v
Cylinder diameter83 mm
Piston stroke.93.2 mm
Compression ratio9.0
Engine featuresintercooler
Hydraulic compensator. there is no
Timing drivebelt
Timing phase adjusterCVVT
Turbochargingtak
What oils to use5.8 liters 5W-30
Fuel type92
Environmental classEURO 4/5
Approximate life expectancy450 000 HP

Fuel consumption Ford Engine Hydb

For example, using the 2009 Ford Kuga with a manual gearbox:
City13.9 litry
Route7.6 litry
Mixed9.9 litry

Engine Overview and Common Failures

The HYDB engine's weight according to the catalog is 175 kg. The HYDB engine number is located at the junction of the block and the gearbox. The main problems are due to contamination of the PCV valve in the crankcase ventilation system. Replacement of its membrane helps with engine noise and leaks from camshaft seals. If you delay with replacement, the oil will leak onto the timing belt, reducing its lifespan. Poor quality fuel quickly damages spark plugs, coils, and the fuel pump. Some owners have had to replace the turbocharger at around 100,000 km mileage.

Engines from the same line as Ford Engine Hydb

See Also

Ford Chba Engine

The 1.8-liter Ford CHBA or CHBB engine, also known as the 1.8L Duratec HE, was produced from 2000 to 2007 and installed in the third generation of the popular Mondeo model in all its body versions on our market. This engine was developed by Mazda and is a variant of the engine marked with the L8-DE index. Duratec HE Engine: QQDB CFBA AODA AOWA CJBA XQDA SEBA SEWA YTMA

Ford Cjba Engine

2.0-liter Ford CJBA or CJBB or 2.0 Duratec HE engine was produced from 2000 to 2007 and was installed in the third generation of the very popular Mondeo model on our market. This engine is basically just a variant of the Mazda MZR LF-DE power unit. Duratec HE: QQDB CFBA CHBA AODA AOWA XQDA SEBA SEWA YTMA

Ford Jqma engine

The 1.6-liter turbocharged engine Ford JQMA or Kuga 2 1.6 EcoBoost was produced from 2012 to 2016 and was only installed in the second generation Kuga crossover models before the facelift. This engine gained some controversy due to problematic cooling issues. The 1.6 EcoBoost engine lineup also includes the JTMA, JQDA, and JTBA engines.

Ford L1n engine

The 1.6-liter engine Ford L1N or Mondeo 1.6 Zetec E 16v was produced from 1998 to 2000 and installed in the second generation of the popular Mondeo model in several body versions. This powertrain had several variants with slightly different designations, such as L1L and L1Q. Zetec series: L1E, EYDC, RKB, NGA, EYDB, EDDB, and EDDC.

VW Cawb engine

The 2.0-liter gasoline engine Volkswagen CAWB 2.0 TSI was produced from 2008 to 2011 and installed in popular models of the group, such as Golf, Jetta, Passat, and Tiguan. The modification of this engine for the American market had its own index CCTA. The EA888 gen1 line also includes engines: CAWA, CBFA, CCTA, and CCTB.

Toyota 7GR-FKS engine

The 3.5-liter V6 engine Toyota 7GR-FKS has been produced in China since 2015 and is installed in the HiAce minibus or the Chinese version of the Land Cruiser Prado 150 SUV. This engine is one of the types of the popular 2GR-FKS engine. The GR series includes the following engines: 2GR‑FXS 3GR‑FE 3GR‑FSE 4GR‑FSE 6GR‑FE 8GR‑FKS 8GR‑FXS