1.4-liter engine Ford ASDA or Focus 2 1.4 Duratec was produced from 2004 to 2010 and was only installed in the basic versions of the second generation of the popular Focus model. There was also a simplified version of this engine marked as ASDB, which complies with Euro 3 environmental standards. Duratec series: FUJA, FXJA, FYJA, HWDA, and SHDA.
| Exact capacity | 1388 cm³ |
| Power system | injector |
| Engine power | 80 HP |
| Torque | 124 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 76 mm |
| Piston stroke. | 76.5 mm |
| Compression ratio | 11 |
| Engine features | DOHC |
| Hydraulic compensator. | there is no |
| Timing drive | belt |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 3.8 liters 5W-30 |
| Fuel type | 95 |
| Environmental class | EURO 4 |
| Approximate life expectancy | 250 000 HP |
| City | 8.6 litry |
| Route | 5.4 litry |
| Mixed | 6.5 litry |
The weight of the ASDA engine according to the catalog is 103 kg. The Ford ASDA engine number is located at the front, where it meets the gearbox. Due to its low power, this engine is revved up to high speeds, which affects its lifespan. Poor-quality gasoline quickly damages the spark plugs, and subsequently the coils. The fuel pump also doesn't tolerate bad fuel, and in the original version, it is quite expensive. The Duratec engine versions for the European market with a timing belt failure can cause bent valves. Since there are no hydraulic compensators, the valve clearances need to be adjusted periodically.
| Focus 2 (C307) | 2004 - 2010 |
The 2.3-liter Ford SEWA or 2.3 Duratec HE engine was produced from 2006 to 2015 and installed in two very popular cars on our market - the Galaxy minivan and S-MAX. This engine is actually a clone of the well-known Japanese Mazda MZR L3-VE engine. Duratec HE: CFBA CHBA AODA AOWA CJBA XQDA SEBA YTMA S7CB
2.0-liter Ford ALDA or 2.0 Duratec ST170 engine was produced from 2002 to 2004 and was only installed in the sport version of the popular Focus model with the index ST170. This engine was basically a modernized version of the Zetec-E unit. The Duratec ST/RS line also includes the following engines: HMDA, HYDA, HYDB, and JZDA.
The 2.5-liter Ford LCBD or 2.5 Duratec V6 engine was produced in the USA from 2000 to 2007 and only installed in the highest versions of the third generation of the popular Mondeo model. This engine shares many similarities with the Mazda GY-DE engine or Jaguar AJ25 engine. The Duratec V6 line also includes engines with the following designations: - SEA, - SGA, - REBA, and - MEBA.
The 1.3-liter petrol engine Ford Ka 1.3 J4D was installed by the company in the years 1996-2002 and used only in the first generation of the very popular Ka model on the European market. There was also a weaker version of this engine with the designation JJB. The Endura-E series also includes engines with the designation: JJA.
The 1.6-liter Volkswagen AVU 8v engine was produced by the company from 2000-2002 and was installed in Audi A3, VW Golf 4 and Bora models, as well as Skoda Octavia. This unit complies with Euro 4 standards and is equipped with an electric throttle, secondary air injection system, and EGR valve. EA113-1.6 series: AEH AHL AKL ALZ ANA APF ARM BFQ BGU BSE BSF
The 1.6-liter Peugeot EP6FDTR or 5GP engine was produced in France from 2015 to 2018 and installed in the hatchback 308 1.6 THP 270 GTi in collaboration with a 6-speed manual gearbox BVM6. After the introduction of more stringent Euro 6d emission standards, this engine received a different name - EP6FADTR. Prince series: EP6CDTM EP6CDTR EP6FDT EP6FDTM EP6FADTX EP6FADTXD