1.2-liter 3-cylinder engine Peugeot EB2 or HMX has been produced since 2012 and used in models labeled as PureTech 82, but it is currently being gradually replaced by the EB2F engine. This powertrain has several variants, such as EB2D, EB2FA, EB2FD, or EB2FAD. The EB series also includes engines: EB0, EB2M, EB2DT, EB2DTS, and EB2ADTX.
| Exact capacity | 1199 cm³ |
| Power system | distributed injection |
| Engine power | 82 HP |
| Torque | 118 nm |
| Engine block | aluminum R3 |
| Block head | aluminum 12v |
| Cylinder diameter | 75 mm |
| Piston stroke. | 90.5 mm |
| Compression ratio | 11 |
| Engine features | wałki równoważące |
| Hydraulic compensator. | there is no |
| Timing drive | strip |
| Timing phase adjuster | dual VTi |
| Turbocharging | there is no |
| What oils to use | 3.25 liters 0W-30 |
| Fuel type | 95 |
| Environmental class | EURO 5/6 |
| Approximate life expectancy | 270 000 HP |
| City | 5.4 litry |
| Route | 3.7 litry |
| Mixed | 4.3 litry |
The dry weight of the EB2 engine in the catalog is 74.7 kg. The EB2 engine number is located at the front where it meets the gearbox. In the first years of production, there was a recall campaign due to axial play in the crankshaft. Additionally, on the forum, you can find many complaints about excessive oil consumption after 100,000 km mileage. However, the main issue here is the timing belt, which is located in the oil sump. It can wear out quickly, and its wear debris clogs the oil channels. For the same reason, the oil pump in this engine does not last particularly long.
| C1 II (B4) | 2014 - 2018 |
| C3 II (A51) | 2012 - 2017 |
| C3 III (B61) | 2017 - CE |
| C3 Aircross II (A88) | 2017 - 2019 |
| C4 Cactus I (E3) | 2014 - 2018 |
| C4 Cactus II (F3) | 2018 - 2020 |
| C-Elysee I (R31) | 2016 - CE |
| DS3 I (A55) | 2012 - 2016 |
| DS3 I (A55) | 2016 - 2018 |
| Crossland X (P17) | 2017 - CE |
| 108 I (B3) | 2014 - 2018 |
| 208 I (A9) | 2012 - 2019 |
| 2008 I (A94) | 2013 - 2019 |
| 301 I (M33) | 2012 - CE |
| 308 II (T9) | 2013 - 2017 |
The 1.2-liter turbocharged engine Peugeot EB2DT or HNZ has been produced by the company since 2014 and is installed in models with the PureTech 110 index, but it is gradually being replaced by the EB2ADTD engine. There are many variations of this powertrain, for example, EB2ADT or EB2DTM. The EB engine line also includes engines: EB0, EB2, EB2M, EB2DTS, and EB2ADTX.
The 1.6-liter Peugeot EP6DTS engine was produced at the factory in Dourin from 2007 to 2018 and was installed as 5FY in the 207 GTi and 308 GT models, as well as 5FD and 5FF in the DS3 Racing. Similar engines were installed in Mini models with the indexes N14B16A and N14B16C. Prince series: EP3 EP3C EP6 EP6C EP6CB EP6DT EP6CDT EP6CDTX EP6FDT
The 1.8-liter engine Peugeot EW7J4 or 6FZ was produced in France from 2000 to 2008 and installed in several popular mid-size models of the company, such as the 406 and 407. Around 2006, this engine began to be replaced by the upgraded model EW7A. The EW series also includes engines: EW7A, EW10J4, EW10A, EW10D, and EW12J4.
The 2.0-liter Peugeot EW10J4 engine with the RFN and RFR designations was produced from 1999 to 2010 and installed in many popular models of the company, such as the 206, 307, 406, 407, 806, and 807. There was also a reinforced version of the unit with a power output of 180 HP and a torque of 200 Nm, designated as EW10J4S or RFK. The EW engine line also includes units such as: EW7J4, EW7A, EW10A, EW10D, and EW12J4.
1.1-liter, 8-valve Fiat 187A1000 engine was produced by the corporation from 2000 to 2012 and installed in the first and second generation of popular models such as Panda, Palio, and Seicento. This engine was essentially an upgrade of the well-known 176B2000 engine with single-point fuel injection. FIRE series: 176A8000, 188A4000, 169A4000, 188A5000, 350A1000, and 199A6000.
The 1.6-liter Volkswagen CFNB engine was produced at the Chemnitz factory from 2010 to 2016 and was installed in the very popular Polo Sedan model as well as in the basic versions of the Jetta. This powertrain differed from the similar CFNA model only in power parameters. The EA111-1.6 engine lineup includes the following engines: ABU, AEE, AUS, AZD, BCB, BTS, and CFNA.