1.1-liter, 8-valve Fiat 187A1000 engine was produced by the corporation from 2000 to 2012 and installed in the first and second generation of popular models such as Panda, Palio, and Seicento. This engine was essentially an upgrade of the well-known 176B2000 engine with single-point fuel injection. FIRE series: 176A8000, 188A4000, 169A4000, 188A5000, 350A1000, and 199A6000.
| Exact capacity | 1108 cm³ |
| Power system | distributed injection |
| Engine power | 54 HP |
| Torque | 88 nm |
| Engine block | cast iron R4 |
| Block head | aluminum 8v |
| Cylinder diameter | 70 mm |
| Piston stroke. | 72 mm |
| Compression ratio | 9.6 |
| Engine features | SOHC |
| Hydraulic compensator. | there is no |
| Timing drive | strip |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 3.5 liters 5W-40 |
| Fuel type | 92 |
| Environmental class | EURO 3/4 |
| Approximate life expectancy | 240 000 HP |
| City | 7.2 litry |
| Route | 4.8 litry |
| Mixed | 5.7 litry |
The weight of the engine 187A1000 according to the catalog is 80 kg. The engine number 187A1000 is located at the junction of the block and the cylinder head. This engine often has minor issues and particularly temperamental fuel injection system. Also, the RPM often fluctuates due to throttle or fuel pump mesh contamination. The engine supports are not reliable and practically all auxiliary equipment is not distinguished by its reliability. In the early years of the engine, the key of the crankshaft pulley was often sheared off and the belt slipped. On high mileage, the piston rings usually become stuck and oil consumption increases.
| Panda I (141) | 2000 - 2003 |
| Panda II (169) | 2003 - 2010 |
| Palio I (178) | 2006 - 2012 |
| Seicento I (187) | 2000 - 2009 |
The 1.2-liter 8-valve Fiat 188А4000 engine was produced in Italy from 1997 to 2012 and installed in popular models of the company, such as Palio, Panda, Punto, Uno, and Strada pickup. This type of engine was also used in Lancia Y and the first generation Ypsilon. FIRE series: 187A1000, 169A4000, 176A8000, 188A5000, 350A1000, and 199A6000.
The 1.4-liter, 12-valve Fiat 182A3000 engine was produced by the company from 1995 to 1999 and installed in models such as the Brava, Bravo, Marea, and also in the Lancia Y with the index 840A2000. There was also a downgraded version of the engine with the indexes 182A5000 and 840A4000 respectively. The Pratola Serra series also includes: 182A2000, 182A1000, and 192A2000.
The 2.0-liter five-cylinder engine Fiat 182A1000 was produced by the company from 1995 to 1999 and was installed in the Bravo, Coupé, and Marea models, as well as in the Lancia Kappa as 838A1000. There was also a more powerful version of this engine with the index 182B7000. The Pratola Serra series also includes: 182A3000, 182A2000, and 192A2000.
The 1.6-liter engine 182A4000 or Fiat Bravo 1.6 16v was produced from 1996 to 2001 and was installed in many popular company models such as Marea, Multipla, and Lancia Dedra. This powertrain is essentially a 16-valve version of the well-known Fiat 128 SOHC engine. The Torque series also includes the engine 182B6000.
The 1.4-liter turbocharged engine Volkswagen CXSA 1.4 TSI was produced from 2013 to 2014 and was exclusively installed in the seventh generation Golf and similar models Audi A3 and Seat Leon. This powertrain is an improved version of the CMBA engine with a different timing. The EA211-TSI line also includes: CHPA, CMBA, CZCA, CZDA, CZEA, and DJKA.
The 3.0-liter diesel engine Audi BMK 3.0 TDI was produced by the company from 2004 to 2007 and was only installed in two models: the Audi A6 with the C5 body and the first generation Volkswagen Phaeton. This engine is not very common on our market and is rather rare. The following engines also belong to the EA896 series: ASB, BPP, BKS, BUG, CASA, and CCWA.