The 2.0-liter Mazda FS engine was produced at the company's Japanese factory from 1991 to 1997 and was installed in both the European version of the 626 GE model and the Asian variants Capella, Cronos, and Efini. In the new generation of the 626 GF model, an updated engine with the FS-DE index was used. F engines: F6, F8, FP, FP-DE, FE, FE-DE, FE3N, FS-ZE, F2.
| Exact capacity | 1991 cm³ |
| Power system | distributed injection |
| Engine power | 115 - 130 HP |
| Torque | 170 - 175 nm |
| Engine block | cast iron R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 83 mm |
| Piston stroke. | 92 mm |
| Compression ratio | 9.0 - 9.5 |
| Engine features | DOHC |
| Hydraulic compensator. | tak |
| Timing drive | belt |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 3.5 liters 5W-30 |
| Fuel type | 92 |
| Environmental class | EURO 2 |
| Approximate life expectancy | 375 000 HP |
| City | 10.8 litry |
| Route | 6.5 litry |
| Mixed | 8.4 litry |
The weight of the Mazda FS engine according to the catalog is 136.3 kg. The Mazda FS engine number is located at the junction with the gearbox. This reliable power unit does not tolerate the use of cheap oil. Hydrocompensators start knocking from poor lubrication even before 50,000 km. Typically, oil scraper rings accumulate here, leading to lubricant consumption. The timing belt is usually changed approximately every 60,000 km, but it will not cause valve failure. A significant part of the remaining problems here are the quirks of the ignition system.
| 626 IV (GE) | 1991 - 1997 |
| Autozam Clef I (GE) | 1992 - 1994 |
| Capella CG | 1994 - 1997 |
| Cronos I (GE) | 1991 - 1995 |
| Efini MS-6 (GE) | 1991 - 1994 |
| MX-6 II (GE) | 1991 - 1997 |
The 1.5-liter Mazda gasoline engine B5-ME was produced by the company from 1992 to 2002 and was installed in the popular Demio model in the Asian market, as well as in the basic versions of the Kia Sephia. There is a version of this engine with the index B5-MI, which has single-point fuel injection instead of multi-point. Engines from the B series: B1, B3, B3-ME, B5, B5-DE, B6, B6-ME, B6-DE, BP, BP-ME.
The 1.6-liter 16-valve Mazda B6-DE engine was produced by the company from 1993 to 2009 and installed in the Familia model, European versions of the MX-3 and Xedos 6, as well as in Kia vehicles with the A6D and S6D indexes. Around 1985-1995, a carbureted version of this engine, indexed as B6D, was also produced. B-series engines: B1, B3, B3-ME, B5, B5-ME, B5-DE, B6, B6-ME, BP, BP-ME.
The 1.8-liter Mazda BP-ME or B8 gasoline engine was produced from 1990 to 1996 and used in the BG and BH series models such as the 323, Familia, and Protege before the facelift. This engine is referred to by different names in various manuals, for example, B8-ME or BP-SOHC. The B engines are: B1, B3, B3-ME, B5, B5-ME, B5-DE, B6, B6-ME, B6-DE, BP.
The 2.5-liter V6 Mazda KL-DE engine was produced at the company's factories from 1992 to 2002 and was installed in European and American versions of the 626, MX-6, or Millenia models. This powertrain is also known as KL-03 and was found under the hood of the Ford Probe. The K-engine series includes: K8-DE, K8-ZE, KF-DE, KF-ZE, KJ-ZEM, KL-G4, and KL-ZE.
The 1.6-liter engine Peugeot EP6CDTR or 5FG THP 270 was produced from 2013 to 2018 and was distinguished by a reinforced block, a crankshaft-piston set, and polymer liners. This engine was only installed in the RCZ R coupe model, and a similar engine EP6FDTR was used in the 308 GTI 270 model. Prince series: EP3 EP6 EP6C EP6DT EP6DTS EP6CDT EP6CDTX EP6FDT
The 2.0-liter Nissan VG20E engine was produced in a Japanese factory from 1983 to 1999 and was installed in many popular models of the company, such as Cedric, Leopard, and Maxima. From 1987 to 2005, a gas version of this engine was available, designated as VG20P with a power output of 100 HP. The VG series engines with 12 valves include: VG20ET, VG30i, VG30E, VG30ET, and VG33E.