The 2.0-liter Mazda FE3N engine was produced at the company's Japanese factory from 1989 to 1997 and installed in the local version of the Capella model in sedan (GD) and wagon (GV) body styles. In Mazda's sports cars, there is also a turbocharged version with the index FE3T and a power output of 260 HP. Engines F: F6, F8, FP, FP-DE, FE, FE-DE, FS, FS-DE, FS-ZE, and F2.
| Exact capacity | 1998 cm³ |
| Power system | injector |
| Engine power | 150 - 170 HP |
| Torque | 180 - 190 nm |
| Engine block | cast iron R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 86 mm |
| Piston stroke. | 86 mm |
| Compression ratio | 9.5 - 10.2 |
| Engine features | DOHC, VRIS |
| Hydraulic compensator. | tak |
| Timing drive | belt |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 3.9 liters 5W-30 |
| Fuel type | 95 |
| Environmental class | EURO 2 |
| Approximate life expectancy | 250 000 HP |
| City | 12.3 litry |
| Route | 7.9 litry |
| Mixed | 9.4 litry |
The weight of the FE3N engine according to the catalog is 168.7 kg. The engine number of the FE3N is located at the junction of the block and the cylinder head. Despite its high level of tuning, the engine is reliable and has a good lifespan. The aluminum cylinder head is very sensitive to overheating, and the hydraulic lifters require inexpensive oil. After 200,000 km, the oil control rings often become clogged and oil consumption occurs. The timing belt is designed for 60,000 km, but with sport pistons, if it breaks, it may cause valve damage. Among the minor issues of the engine are oil leaks and the finicky ignition system.
| Capella IV (GD) | 1989 - 1991 |
| Capella GV | 1989 - 1997 |
The 1.1-liter, 8-valve Mazda B1 engine was manufactured in Japan and Korea from 1987 to 1994 and used in the first two generations of the 121 model and its Kia Pride counterpart. In addition to the carbureted version, a fuel-injected version was also available in the European market. B-series engines: B3, B3-ME, B5, B5-ME, B5-DE, B6, B6-ME, B6-DE, BP, BP-ME.
The 1.5-liter eight-valve Mazda B5 engine was manufactured by the company in Japan from 1987 to 1994 and installed in various models of the Familia, including the Etude coupe. In addition to the carbureted version, there was also a fuel-injected version, but only in Ford Festiva cars. B engines: B1, B3, B3-ME, B5-ME, B5-DE, B6, B6-ME, B6-DE, BP, BP-ME.
2.3-liter engine Mazda L3-VDT or MZR 2.3 DISI Turbo was produced from 2005 to 2013 and installed in MPS versions of 3 and 6 models as well as the popular CX-7 crossover. There are several variations of this power unit designated as L3K9 and L3-VET. Engine L: L8-DE, L813, LF-DE, LF-VD, LF17, LFF7, L3-VE, L3C1, and L5-VE.
The 2.3-liter Mazda L3C1 engine was produced by the company from 2002 to 2008 and was only installed in the first generation of the popular sixth series model on our market. In reality, this power unit did not differ much from its analogue with the index L3-VE. Engines: L8-DE, L813, LF-DE, LF-VD, LF17, LFF7, L3-VE, L3-VDT, and L5-VE.
The 4.6-liter Toyota 1UR-FE engine was introduced in 2006 as a power unit for SUVs, full-size pickups, and luxury models in emerging markets. Its main difference compared to the 1UR-FSE is the fuel supply system: distributed fuel injection instead of direct injection. The UR family also includes the following engines: 1UR-FSE, 2UR-GSE, 2UR-FSE, and 3UR-FE.
The 1.8-liter Mitsubishi 4G37 engine was produced by the Japanese company from 1983 to 1994 and installed in popular models such as Lancer, Galant, and Eclipse. This engine was available in both carbureted and fuel-injected ECI-MULTI versions. The Mitsubishi 4G3 engine line also includes the 4G32 and 4G33 engines.