1.6-liter Ford PNBA or Mondeo 1.6 Duratec Ti-VCT engine was produced from 2007 to 2010 and only installed in the base versions of the second generation Mondeo model before the facelift. After the update in 2010, this powertrain was replaced by its Euro 5 version with the KGBA index. The Duratec Ti-VCT line also includes: UEJB, IQDB, HXDA, PNDA, SIDA, and XTDA.
| Exact capacity | 1596 cm³ |
| Power system | injector |
| Engine power | 125 HP |
| Torque | 160 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 79 mm |
| Piston stroke. | 81.4 mm |
| Compression ratio | 11 |
| Engine features | DOHC |
| Hydraulic compensator. | there is no |
| Timing drive | strip |
| Timing phase adjuster | on intake and exhaust. |
| Turbocharging | there is no |
| What oils to use | 4.1 liters 5W-30 |
| Fuel type | 95 |
| Environmental class | EURO 4 |
| Approximate life expectancy | 250 000 HP |
| City | 10.3 litry |
| Route | 5.7 litry |
| Mixed | 7.4 litry |
The weight of the PNBA engine is 91 kg (without attachments). The Ford PNBA engine number is located at the front, where it meets the gearbox. This engine is very weak for the Mondeo and is often revved, which affects its lifespan. Components of the ignition system quickly fail due to poor fuel quality. It is recommended to regularly check the condition of the timing belt, as its breakage can cause valve damage. Valve cover and rear crankshaft seal are common sources of lubricant leaks. Weak points also include camshaft phasers, fuel pump, and almost all attachments.
| Mondeo 4 (CD345) | 2007 - 2010 |
The 2.3-liter Ford SEBA or 2.3 Duratec HE MI4 engine was produced only between 2007 and 2015 and was installed in the fourth generation of the popular Mondeo model on our market. This engine was practically no different from the well-known Mazda engine with the L3-VE index. Duratec HE: CFBA CHBA AODA AOWA CJBA XQDA SEWA YTMA S7CB
The 3.0-liter Ford REBA engine or 3.0 Duratec V6 SE was produced in the United States from 2004 to 2007 and was only installed in the most expensive and powerful versions of the Mondeo model, except for the sporty ST220 version. In terms of design, this engine has a lot in common with the Mazda AJ-DE and Jaguar AJ30 power units. The Duratec V6 line also includes engines: - SEA, - SGA, - LCBD, and - MEBA.
The 2.0-liter Ford TNBB and TNBA engines, as well as the 2.0 EcoBoost 200, were produced from 2010 to 2014 and only installed in the fourth generation of the popular Mondeo model after facelift. The Galaxy and S-MAX minivans were equipped with similar engines with TNWA and TNWB indexes. The 2.0 EcoBoost engine lineup also includes the following engines: TPBA, TPWA, and R9DA.
The 2.0-liter turbocharged engine, Ford TPWA or 2.0 EcoBoost 240, was produced from 2010 to 2015 and only installed in the turbocharged versions of the first-generation S-MAX model after the facelift. A similar engine, designated TPBA, was installed in the fourth generation of the Mondeo model. The 2.0 EcoBoost lineup also includes the following power units: TPBA, TNBB, and R9DA.
The 5.4-liter, 12-cylinder engine BMW M73 or M73B54 was produced from 1994 to 2002 and was installed in the highest models of the company: 7 Series sedans, 8 Series coupes, and Rolls-Royce Silver Seraph. In 1998, an updated version of this engine with the index M73B54TU or M73TU was introduced. The V12 engine line also includes the following power units: M70, N73, and N74.
The 2.5-liter Hyundai D4BA diesel engine was produced by the company from 1989 to 2003 and was installed in both commercial vehicles and the Starex minibus and Galloper SUV. This powertrain is essentially just a clone of the popular Mitsubishi diesel engine 4D56. Also included in this engine family are the diesel engines: - D4BB - D4BF and - D4BH.