The 1.5-liter turbocharged engine Great Wall GW4G15F has been produced at the factory in China since 2019 and is installed in many modern Haval models, such as M6, H2, H4, and second-generation H6. This engine is essentially an updated version of the GW4G15B engine, meeting even stricter emission standards. The Toyota engine clones also include: GW4G15, GW4G15K, and GW491QE.
| Exact capacity | 1497 cm³ |
| Power system | distributed injection |
| Engine power | 143 - 150 HP |
| Torque | 202 - 210 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 75 mm |
| Piston stroke. | 84.7 mm |
| Compression ratio | 9.6 |
| Engine features | DOHC |
| Hydraulic compensator. | there is no |
| Timing drive | chain |
| Timing phase adjuster | at the inlet VVTi |
| Turbocharging | MHI BM60 |
| What oils to use | 3.8 liters 5W-30 |
| Fuel type | 92 |
| Environmental class | EURO 6 |
| Approximate life expectancy | 250 000 HP |
| City | 9.9 litry |
| Route | 6.2 litry |
| Mixed | 7.5 litry |
The assembled weight of the GW4G15F engine is 115 kg. The engine number GW4G15F is located at the junction of the block and the gearbox. This engine appeared relatively recently and its breakdown statistics have not yet been collected. It is not particularly criticized on forums, and the brand's oil consumption problem has already been resolved. The chains of engines in this series are not the most durable, we will see how it will be with this one. There are also complaints about failures in the ignition system and auxiliary equipment. There are no hydraulic compensators, and the clearances here are adjusted by selecting pushers.
| F5 I | 2019 - 2020 |
| H2 I | 2019 - 2021 |
| H4 I | 2019 - 2020 |
| H6 II | 2019 - CE |
| H6 Coupe II | 2019 - CE |
| M6 I | 2019 - CE |
The 2.0-liter turbocharged petrol engine Great Wall 4G63S4T has been produced in China since 2012 and is used in many models. In our market, it is known from the Hover H3 and Haval H5 SUVs. Turbocharged engines based on the Mitsubishi unit 4G63T have also been created for BAW, Landwind, and Zotye vehicles. Other Mitsubishi clones include: 4G63S4M, 4G64S4M, and 4G69S4N.
The 1.5-liter Great Wall GW4B15A engine has been produced at the factory in China since 2020 and is installed in the popular F7 crossover and its counterpart, the F7x, in the domestic market. This turbocharged engine differs from its predecessor in terms of a different turbine and a 350-bar injection system. Own engines: GW4B15, GW4B15D, GW4C20B, GW4C20NT, and GW4N20.
The 1.5-liter turbo engine GW4B15D by Great Wall is produced at the factory in China since 2021 and currently only installed in all-wheel-drive versions of the popular Jolion crossover here. This engine differs from its predecessor with a very high compression ratio of 11.8. Other available engines include: GW4B15A, GW4C20A, GW4C20B, GW4C20NT, and GW4N20.
The 2.0-liter turbocharged engine Great Wall GW4C20 or 2.0 GDIT was produced from 2013 to 2019 and installed in popular models of the company, such as H6 Coupe, H8, and H9 before restyling. In many sources, this engine is confused with GW4C20NT, which was installed in F7 and F7x crossovers. The company's own engines are: GW4B15A, GW4B15D, GW4C20A, GW4C20B, and GW4N20.
The 6.2-liter V8 GM L86 engine was produced by the American corporation from 2013 to 2020 and installed in popular pickups and SUVs such as the Chevrolet Tahoe and Cadillac Escalade. An updated version of this engine is known by its own index, L87. The Vortec line also includes engines: LY2, LY5, LFA, L92, and L83.
The 1.6-liter Peugeot EP6FDT or 1.6 THP 165 engine has been produced in Dourginie since 2014 and is installed in many models of the company for the European market, such as the crossovers 3008 and 5008. There are three versions of this engine: 5GW and 5GZ with a power of 165 HP, and 5GL with a power of 135 HP. Prince Series: EP6DT EP6DTS EP6CDT EP6CDTM EP6CDTR EP6FDTM