The 1.5-liter turbocharged engine Great Wall GW4G15K has been produced at the factory in China since 2020 and is currently only installed in the popular Haval Jolion first generation crossover here. Structurally, this powertrain is an upgraded version of the Toyota 1NZ-FE engine. The Toyota engine clones also include: - GW4G15 - GW4G15B - GW4G15F - GW491QE
| Exact capacity | 1497 cm³ |
| Power system | distributed injection |
| Engine power | 143 HP |
| Torque | 210 nm |
| Engine block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder diameter | 75 mm |
| Piston stroke. | 84.7 mm |
| Compression ratio | 9.3 |
| Engine features | DOHC |
| Hydraulic compensator. | there is no |
| Timing drive | chain |
| Timing phase adjuster | at the inlet VVTi |
| Turbocharging | tak |
| What oils to use | 3.8 liters 5W-30 |
| Fuel type | 92 |
| Environmental class | EURO 5 |
| Approximate life expectancy | 220 000 HP |
| City | 9.9 litry |
| Route | 6.1 litry |
| Mixed | 7.5 litry |
The weight of the GW4G15K engine according to the catalog is 115 kg. The engine number GW4G15K is located at the back, where it meets the gearbox. This turbocharged engine has only recently appeared and no statistics on its malfunctions have been collected yet. One known problem with power units from this family is oil consumption. Around 100,000 km, the timing chain needs to be replaced as it tends to stretch. Weak points also include the ignition system, turbine valve, and engine supports. Valve clearance should be adjusted by selecting lifters every 90,000 km.
| Jolion I | 2020 - CE |
The 1.5-liter Great Wall GW4G15 engine has been produced in a Chinese factory since 2008 and is installed in popular models such as the Hover M2, M4, or similar Haval H1. This power unit is actually a licensed copy of the Japanese Toyota engine 1NZ-FE. Other clones of Toyota engines include: GW4G15B, GW4G15F, GW4G15K, and GW491QE.
The 1.5-liter turbocharged engine Great Wall GW4G15F has been produced at the factory in China since 2019 and is installed in many modern Haval models, such as M6, H2, H4, and second-generation H6. This engine is essentially an updated version of the GW4G15B engine, meeting even stricter emission standards. The Toyota engine clones also include: GW4G15, GW4G15K, and GW491QE.
The 2.4-liter engine Great Wall 4G69S4N has been produced at a Chinese factory since 2009 and installed in many models of the conglomerate, but it is mainly known in our country from the Hover H5 and H6 SUVs. Based on the Mitsubishi engine 4G69, power units were also created for BYD, JMC, and Landwind vehicles. Mitsubishi clones include: 4G63S4M, 4G63S4T, and 4G64S4M.
The 1.5-liter turbocharged engine Great Wall GW4B15 has been produced at the Chinese factory since 2018 and is installed in the basic versions of the most popular F7 and F7x crossovers. In our market in 2020, this turbocharged engine was replaced by the newer model GW4B15A. Own engines: GW4B15D, GW4C20A, GW4C20B, GW4C20NT, and GW4N20.
The 2.4-liter Nissan KA24DE engine was produced from 1993 to 2008 and is most well-known for being used in the mass-produced sedans Altima, minivans Presage, pickups Navara, and SUVs X-Terra. This powertrain was characterized by good reliability, but had a high fuel demand. The KA family also includes the engines: KA20DE and KA24E.