The 1.4-liter, 12-valve Fiat 182A3000 engine was produced by the company from 1995 to 1999 and installed in models such as the Brava, Bravo, Marea, and also in the Lancia Y with the index 840A2000. There was also a downgraded version of the engine with the indexes 182A5000 and 840A4000 respectively. The Pratola Serra series also includes: 182A2000, 182A1000, and 192A2000.
| Exact capacity | 1370 cm³ |
| Power system | mono-injection |
| Engine power | 80 HP |
| Torque | 112 nm |
| Engine block | cast iron R4 |
| Block head | aluminum 12v |
| Cylinder diameter | 82 mm |
| Piston stroke. | 64.87 mm |
| Compression ratio | 9.8 |
| Engine features | SOHC |
| Hydraulic compensator. | tak |
| Timing drive | strip |
| Timing phase adjuster | there is no |
| Turbocharging | there is no |
| What oils to use | 4.1 liters 5W-40 |
| Fuel type | 92 |
| Environmental class | EURO 2 |
| Approximate life expectancy | 200 000 HP |
| City | 9.0 litry |
| Route | 5.2 litry |
| Mixed | 7.2 litry |
The weight of the engine 182A3000 according to the catalog is 140 kg. The engine number 182A3000 is located at the junction of the block and the gearbox. The most well-known problem of this engine is rapid wear of the camshaft. The cause is the formation of deposits in the lubrication supply channels in the cylinder head. Oil leaks, especially from the camshaft seals, are also common here. It is advisable to change the timing belt every 60,000 km or with its breakage to prevent valve damage. The electrical system and auxiliary equipment in the engine are not very reliable.
| Brava I (182) | 1995 - 1998 |
| Bravo I (182) | 1995 - 1998 |
| Marea I (185) | 1996 - 1999 |
1.1-liter, 8-valve Fiat 187A1000 engine was produced by the corporation from 2000 to 2012 and installed in the first and second generation of popular models such as Panda, Palio, and Seicento. This engine was essentially an upgrade of the well-known 176B2000 engine with single-point fuel injection. FIRE series: 176A8000, 188A4000, 169A4000, 188A5000, 350A1000, and 199A6000.
The 1.2-liter 8-valve Fiat 188А4000 engine was produced in Italy from 1997 to 2012 and installed in popular models of the company, such as Palio, Panda, Punto, Uno, and Strada pickup. This type of engine was also used in Lancia Y and the first generation Ypsilon. FIRE series: 187A1000, 169A4000, 176A8000, 188A5000, 350A1000, and 199A6000.
The 1.8-liter engine Fiat 370A0011 or 1.8 E.torQ is produced in Brazil since 2010 and installed in popular models such as Argo, Toro, Linea and Strada pickup truck in Latin America. This engine is also found under the hood of the Jeep Renegade crossover in many markets. Also part of the E.torQ series is the engine 310A5011.
The 1.4-liter, 12-valve Fiat 182A3000 engine was produced by the company from 1995 to 1999 and installed in models such as the Brava, Bravo, Marea, and also in the Lancia Y with the index 840A2000. There was also a downgraded version of the engine with the indexes 182A5000 and 840A4000 respectively. The Pratola Serra series also includes: 182A2000, 182A1000, and 192A2000.
The 2.4-liter Hyundai G4JS engine was manufactured at the factory in South Korea from 1998 to 2007 under a Mitsubishi license, as it was only a modification of the 16-valve version of the 4G64 engine. In our country, this Sirius II series engine is known for the Sorrento and Santa Fe off-road vehicles. The Sirius engine series includes: G4CR, G4CM, G4CN, G4JN, G4CP, G4JP, and G4CS.
The 1.2-liter turbocharged Nissan HRA2DDT or HR12DDT engine was produced from 2013 to 2018 and installed in popular models such as Juke, Pulsar, and Qashqai in the 1.2 DIG-T variants. This engine is also installed in Renault and Dacia vehicles under the index H5Ft. The HR engine family includes the following engines: HR10DDT, HR12DE, HR12DDR, HR13DDT, HR15DE, HR16DE.