The 0.9-liter twin-cylinder engine Fiat 312A2000 or 0.9 TwinAir has been used since 2010 and installed in popular models of the Italian company, such as 500C, Panda, and Punto. This drivetrain can also be found under the hood of Lancia Ypsilon and Alfa Romeo MiTo cars. The TwinAir lineup also includes the 199B6000.
| Exact capacity | 875 cm³ |
| Power system | distributed injection |
| Engine power | 85 HP |
| Torque | 145 nm |
| Engine block | cast iron R2 |
| Block head | aluminum 8v |
| Cylinder diameter | 80.5 mm |
| Piston stroke. | 86 mm |
| Compression ratio | 10 |
| Engine features | MultiAir |
| Hydraulic compensator. | there is no |
| Timing drive | chain |
| Timing phase adjuster | there is no |
| Turbocharging | Mitsubishi TD02V |
| What oils to use | 3.2 liters 0W-30 |
| Fuel type | 95 |
| Environmental class | EURO 5/6 |
| Approximate life expectancy | 200 000 HP |
| City | 5.5 litry |
| Route | 3.6 litry |
| Mixed | 4.2 litry |
The weight of the 312A2000 engine according to the catalog is 85 kg. The engine number 312A2000 is located at the junction of the block and the gearbox. Most of the problems with this engine are related to malfunctions in the MultiAir system. We don't have anyone who knows how to repair this system, so usually the entire block is replaced. The timing chain has a modest lifespan, sometimes less than 100,000 km. Saving on lubrication often leads to the failure of the expensive turbocharger. The engine uses a number of expensive parts such as an adjustable pump and thermostat.
| MiTo I (Type 955) | 2011 - 2013 |
| 500 II (312) | 2010 - CE |
| 500C II (312) | 2010 - CE |
| 500L II (351) | 2013 - 2018 |
| Panda III (319) | 2012 - CE |
| Punto IV (199) | 2012 - 2013 |
| Ypsilon II (846) | 2011 - CE |
The 2.5-liter V6 engine Alfa Romeo AR32405 was produced in Arese from 2000 to 2005 and was only installed in advanced versions of the popular European model 156. A similar engine was also installed in the sedan 166 with its own index AR36201. The Busso V6 engine series includes the following units: AR34102, AR67301, and AR16105.
1.4-liter, 8-valve Fiat 350A1000 engine has been produced by the company since 2005 and during this time it has been installed in many models such as Albea, Punto, Linea, and Fiorino. This engine has also been used in Lancia Muza, first generation Ypsilon, and Alfa Romeo Mito. FIRE series: 187A1000, 188A4000, 169A4000, 176A8000, 188A5000, and 199A6000.
The 3.2-liter V6 engine, Alfa Romeo 939A000, was produced at GM factories from 2005 to 2010 and installed in popular models of the Italian company, such as Brera and the similar Spider. This engine was developed based on the GM LU1 block, but it has its own cylinder heads and Twin Phaser timing regulators. The JTS engine series includes: 937A1000 and 939A5000.
The 1.8-liter engine 960A1000 or Alfa Romeo 1.75 TBi was produced from 2013 to 2019 and installed in more powerful versions of the popular Giulietta model, which is highly popular in Europe. This powertrain can be found under the hood of the two-seater sports coupe Alfa Romeo 4C. The TBi engine lineup also includes an engine marked as 939B1000.
The 1.4-liter turbocharged GM LUV engine was produced in the company's plants from 2010 to 2020 and installed in American versions of models such as Chevrolet Sonic, Cruze, Trax, and Buick Encore. This powertrain is essentially a modification of the LUJ engine with a different block configuration. The third generation of the GM Family 0 engine includes: LDC, LDD, and LUJ.
The 2.0-liter gasoline engine Toyota 1G-E was produced by the company from 1984 to 1991 and was installed in export versions of models such as Crown, Cressida, and Mark II Wagon estate. Often, this index also indicated the 1G-EU engine for the Japanese market, which causes confusion. G series: 1G-EU 1G-GEU 1G-GTEU 1G-GZEU 1G-GE 1G-GTE 1G-GZE 1G-FE