Toyota 1G-GZE Engine

The 2.0-liter turbocharged engine Toyota 1G-GZEU with a capacity of 2.0 liters was installed by the company from 1985 to 1989 only in the Crown model with S120 and S130 body, intended for the Japanese market. This powertrain received a new index 1G-GZE after a slight update in 1988. G series: 1G-EU 1G-GEU 1G-GTEU 1G-E 1G-GE 1G-GTE 1G-GZE 1G-FE

Engine specs

Exact capacity1988 cm³
Power systeminjector
Engine power160 - 165 HP
Torque210 nm
Engine blockcast iron R6
Block headaluminum 24v
Cylinder diameter75 mm
Piston stroke.75 mm
Compression ratio8.0
Engine featuresDOHC
Hydraulic compensator. there is no
Timing drivestrip
Timing phase adjusterthere is no
Turbochargingcompressor SC14
What oils to use4.2 liters 5W-30
Fuel type92
Environmental classEURO 2
Approximate life expectancy300 000 HP

Fuel consumption Toyota 1G-GZE Engine

For example, on the basis of the 1986 Toyota Crown with an automatic transmission:
City15.5 litry
Route9.7 litry
Mixed12.4 litry

Engine Overview and Common Failures

The weight of the 1G-GZEU engine according to the catalog is 200 kg. The engine number 1G-GZEU is located at the junction of the block and the gearbox. The compressor itself usually does not cause any trouble, but it requires lubrication replacement. The outdated flow meter over time becomes inaccurate and starts to over-enrich the mixture. The water pump is characterized by low reliability and high cost. There are no hydraulic compensators, and valve clearances need to be checked every 20,000 km. On high mileage, oil consumption due to ring deposits is often encountered here.

Engine Toyota 1g-gzeu

Toyota
Crown 7 (S120)1985 - 1987
Crown 8 (S130)1987 - 1989

Engines from the same line as Toyota 1G-GZE Engine

See Also

Toyota 4A-GZE engine

The 1.6-liter supercharged engine Toyota 4A-GZE was produced by the company from 1986 to 1995 and used in sport versions of popular models such as Corolla, Sprinter, and MR2. This powertrain is often used for inexpensive tuning of old cars in the garage. Series A: 4A-F 4A-FE 4A-FHE 4A-GE 5A-F 5A-FE 5A-FHE 7A-FE 8A-FE

Toyota 5GR-FE engine

The 2.5-liter V6 engine, Toyota 5GR-FE, was produced at a Chinese factory from 2005 to 2017 and was exclusively installed in local versions of popular models such as Crown and Reiz. This powertrain features direct fuel injection and Dual VVT-i valve timing control. GR Series: 1GR-FE 2GR-FE 3GR-FE 4GR-FSE 6GR-FE 7GR-FKS 8GR-FKS

Toyota 7M-GTE engine

The 3.0-liter turbocharged engine Toyota 7M-GTE was produced at the Japanese factory from 1986 to 1992 and was exclusively installed in two sports models of the company: the Z20 body Soarer and the Supra A70. There were also racing versions of this engine called 7M-GTEU with power up to 580 HP. The M series also includes the following engines: 5M-EU, 5M-GE, and 7M-GE.

Toyota 4s-fe engine

The 1.8-liter petrol engine Toyota 4S-FE was produced by the company from 1989 to 1999 and installed in popular models of the corporation such as Camry, Carina, Caldina, and Corona. This powertrain gained a reputation as one of the most reliable and trouble-free engines. The S series includes: 3S-FC, 3S-FE, 3S-FSE, 3S-GE, 3S-GTE, 4S-Fi, and 5S-FE.

Hyundai G6dm engine

The 3.3-liter Hyundai-Kia G6DM or 3.3 GDi engine has been produced by the company since 2016 and is installed in front-wheel drive sedans such as the Cadenza or Grandeur, as well as in the Carnival minivan. In the case of our K900 version, this engine has been adapted for rear-wheel drive and delivers 249 horsepower. Lambda Line: G6DF G6DG G6DJ G6DH G6DK G6DM G6DN G6DP G6DS

Hyundai G4ne engine

2.0-liter engine Hyundai G4NE or 2.0 MPi Hybrid was produced by the company from 2012 to 2015 and installed in hybrid versions of Sonata 6 and similar Kia Optima 3 on the Asian market. In the American market, such hybrids were equipped with a 2.4-liter engine G4KK from the Theta II series. The Nu series also includes the following internal combustion engines: G4NA, G4NB, G4NC, G4ND, G4NG, G4NH, and G4NL.