Jeep Engine Ehd

The 3.0-liter V6 Jeep EHD engine is produced by an American company since 2014 and is installed in the large SUV Grand Cherokee in the WK2 version in certain markets. This power unit is also used in Chinese versions of the Wrangler off-road vehicle or the 300C sedan. Other engines in the Pentastar series include: EHB, ERB, and ERC.

Technical specifications of the Jeep EHD 3.0-liter engine.

Exact capacity2997 cm³
Power systeminjector
Engine power235 HP
Torque295 nm
Engine blockaluminum V6
Block headaluminum 24v
Cylinder diameter91 mm
Piston stroke.76 mm
Compression ratio10.2
Engine featuresDOHC
Hydraulic compensator. tak
Timing drivechain
Timing phase adjusterDual VVT
Turbochargingthere is no
What oils to use5.6 liters 5W-30
Fuel type95
Environmental classEURO 5
Approximate life expectancy300 000 HP

Fuel consumption Jeep Engine Ehd

For example, the 2015 Jeep Grand Cherokee with automatic transmission:
City13.9 litry
Route8.1 litry
Mixed10.2 litry

Engine Overview and Common Failures

The weight of the EHD engine assembly is 165 kg. The EHD engine number is located at the junction of the engine block and the gearbox. On the forum, the most common complaints are about the quick failure of the cam phasers. Following the frequency of owners' complaints, regular leaks from the oil cooler are also a weak point of the start-stop system. The electromagnetic motor of the vacuum pump is also a weak point of the start-stop system. The use of unsuitable oil often leads to wear of the camshaft lobes. The thermostat, water pump, and oil pump are also not known for having the highest durability.

Engine Jeep Ehd

Jeep
Grand Cherokee 4 (WK2)2014 - CE

Engines from the same line as Jeep Engine Ehd

See Also

Jeep Engine Erh

The 4.0-liter petrol engine Jeep ERH or AMC 242 was produced from 1986 to 2006 and was practically installed in all off-road models of the brand, such as Wrangler, Cherokee, and Grand Cherokee. Until 1991, the engine was equipped with the RENIX fuel injection system, and then switched to its own Mopar system. The AMC series also includes the EPE engine.

Jeep Engine Ehd

The 3.0-liter V6 Jeep EHD engine is produced by an American company since 2014 and is installed in the large SUV Grand Cherokee in the WK2 version in certain markets. This power unit is also used in Chinese versions of the Wrangler off-road vehicle or the 300C sedan. Other engines in the Pentastar series include: EHB, ERB, and ERC.

Jeep EV engine

The 4.7-liter V8 engine Jeep EVС or PowerTech High Output was produced from 2002-2008 and installed in the Grand Cherokee SUV, as well as briefly in the Ram and Dakota pickups. This engine not only had more power but also featured a knock sensor. The PowerTech series also includes the engines: EKG, EVA, and EVE.

Jeep Eve Engine

The 4.7-liter V8 gasoline engine Jeep EVE was produced by the company from 2008 to 2013 and installed in high-performance versions of models such as Grand Cherokee, Commander, Aspen. This engine was characterized by an electronic throttle body and new cylinder heads with two spark plugs per cylinder. The PowerTech series also includes the following power units: EKG, EVA, and EVC.

Ford RTK engine

The 1.8-liter Ford RTK or RTJ engine, or the 1.8 Endura DE, was produced from 1995 to 2000 and installed in the fourth generation of the popular Fiesta model prior to the facelift. This diesel engine is not very reliable, but it is suitable for repairs due to its simple design. The Endura-DE lineup also includes engines: RVA, RFA, and RFN.

Mitsubishi 4g93 Engine

The 1.8-liter Mitsubishi 4G93 engine was produced by a Japanese company from 1991 to 2014 and was not only installed in many models of this company, but also in Volvo, Proton, or Brilliance cars. The engine was available in versions with carburetor, fuel injection, direct injection, and turbocharging. The 4G9 line also includes the following engines: - 4G91, - 4G92, - 4G94.