auto-info.tech

Datsun mi-DO

The Datsun mi-DO was presented at the car show in 2014, but its sales started a year later. This version is actually a modernized version of the Lada Kalina 2 hatchback. The assembly of this car took place in a full production cycle in Togliatti at the Avtovaza plant. In the Datsun model lineup, there was also a model: on-Do (2014 - 2020).

The car was equipped with engines:

Datsun mi-DO

Common Features
Engine Power106 HP
Torque148 NM
Acceleration to 100 km/h10.5 seconds
Max speed180 km/h
City consumption8.8 liters
Combustion on the road5.6 liters
Mixed expenditure6.6 liters
Fuel tank capacity50 liters
Loaded weight1160 liters
Full weight1560 liters
Load400 liters
Trunk volume240 liters
Common dimensions
Overall Length3950 mm
Width1700 mm
Height1500 mm
Distance axis2476 mm
Front belt circle1431 mm
Rear wheels1414 mm
Overhanging front809 mm
Rear projection665 mm
Overall ground clearance174 mm
Number of doors | seats5 | 5
Tire size185/60 R14

Overview and Common Failures

This hatchback is a clone of the Kalina 2, so there are no problems with spare parts. The paint coating is weak, chips appear quickly and immediately start to turn yellow. Compared to the Kalina 2, the sound insulation is better here, and there are door closers for the front doors. The interior electrical system is not known for its reliability, and the radio in particular often fails. Engine Both engines are quite reliable, and if anything breaks, it can be repaired inexpensively. Until 2018, the valves of the engines would bend with a timing belt failure, meaning they were interference engines. Transmission There are no complaints about the automatic transmission, but the manual transmission here is noisy and the shift quality is mediocre. Suspension The most common parts to replace in the suspension are the support bearings, as well as the tie rod ends.

Cars from the Rosyjski rynek lineup